Sun Microsystems Sun Fire X4150 Server - Manual (Page 19)

9
C H A P T E R
2
Installing the Sun Fire X4150 Server
Into a Rack with Slide-Rails
This chapter describes how to place the Sun Fire X4150 server into a rack using the
rail assembly in the rackmount kit. Perform this procedure if the rail assembly is
purchased.
This chapter includes the following topics:
■ “Before You Install” on page 9
■ “Checking Compatibility” on page 11
■ “Disassembling Slide-Rails” on page 12
■ “Installing the Mounting-Brackets Onto the Server” on page 14
■ “Attaching the Slide-Rail Assemblies to the Rack” on page 15
■ “Installing the Server Into the Slide-Rail Assemblies” on page 18
■ “Installing the Cable Management Arm” on page 21
■ “Verifying Operation of the Slide-rails and CMA” on page 28
Note – In this guide, the term
rack means either an open rack or a closed cabinet.
Before You Install
Read the overview and see the service label on the top cover before you begin to
install the Sun Fire X4150 server.