Siemens 3035isdn - Manual (Page 86)

150
ISDN glossary
17.5.00 Glossar.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0
P Park
You park a call when you move a telephone during a call or if you want to
continue your call at another phone on the same line. The connection is
maintained for this period.
PIN
Abbreviation for Personal Identification Number. Protects against unautho-
rised use, for example base PIN, answering machine PIN, handset PIN.
Preparing to dial , see also En-bloc dialling
On some telephones with displays, you can first enter a number, check it
and then dial.
R Recording telephone calls
Feature of the answering machine; enables a conversation to be recorded
even during a call.
Remote power-on
This feature is secured by a PIN and enables the answering machine to be
activated and deactivated while the phone is connected.
Remote replay
Answering machine function. You can listen to messages from a remote sta-
tion, usually in association with options for deleting messages or changing
announcements.
Repeater
A repeater is used to increase the range of the handsets connected to your
base station telephone. The device receives the radio signal from the base
station telephone and broadcasts it on.
Ring delay
For every internal telephone, you can set the number of rings permitted be-
fore a call is signalled. This setting can also be set for each MSN call number.
When operating your handset via the private call number, calls should only
be signalled, for example, after three rings over and above the base station
telephone (the call is signalled at the base station telephone immediately
with the first ring burst), while your handset should ring immediately in the
case of calls to the business number.
Room monitoring
A feature of an answering machine or telephone, for example. Allows you to
“listen in” to rooms using the telephone network. Protected by a PIN.
S S 0 -Bus
Four-wire cable on ISDN connection. This provides two B-channels and one
D-channel. Up to twelve ISDN sockets can be connected to this, up to eight
of which can be used at the same time.
Standard connection
ISDN connection with a series of features, such as call waiting, three-party
conference or callback on busy. See also Enhanced connection.
T Telephone directory
Enhanced phone feature that stores the name and call number of several
subscribers. The call numbers can be found and dialled quickly.
151
ISDN glossary
17.5.00 Glossar.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0
Terminal portability
Terminal Portability. Also known as parking. An incoming call can be placed
on hold for up to three minutes in the local exchange and is then retrieved
on another phone, fax machine or PC, for example. The caller hears an ap-
propriate announcement in the interim.
Three-party conference
Connection with two external subscribers (ISDN or analog network custom-
ers).
Toggling
Toggling enables you to switch back and forth between two external parties
without the waiting subscriber being able to hear.
TP
See Terminal portability.
Trace
“Identify/Trace” feature. MCID stands for “Malicious Call Identification“.
When unwanted calls are received, you can have the caller number stored
in the exchange. You must apply to the provider for this feature.