Siemens 3035isdn - Manual (Page 67)

118
Press the keys in the
specified order
Answering machine
17.5.00 Anrufb.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0
Changing the recording length
A message can be 1, 2, 3 minutes long or unrestricted in
length. If you opt for a restricted recording length it is ad-
visable to use a concluding announcement, see page 105.
3 Call up the AM menu.
< %DVLF6HWWLQJV = Select and confirm.
P = Enter and confirm the system PIN (factory setting is 0000).
< 5HFRUGLQJÖÖÖÖÖÖÖ =
< 0HVVDJHOHQJWKÖÖ =
<
Setting = Select the required setting.
#
and
$
The phone is in standby.
Activating/deactivating open listening
If you do not want to listen in during recordings.
3 Call up the AM menu.
< %DVLF6HWWLQJV = Select and confirm.
P = Enter and confirm the system PIN (factory setting is 0000).
< 5HFRUGLQJÖÖÖÖÖÖÖ =
< 2SHQOLVWHQLQJÖÖ Function marked = on/not marked = off.
To change the setting:
= Activate/deactivate function.
# and $ The phone is in standby.
119
Press the keys in the
specified order
Answering machine
17.5.00 Anrufb.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0
Deactivating automatic pause
If this function is activated, the answering machine switch-
es to pause mode after each message is played back.
3 Call up the AM menu.
< %DVLF6HWWLQJV = Select and confirm.
P = Enter and confirm the system PIN (factory setting is 0000).
< $FWRSWLRQ = Select and confirm.
$XWRPDWLF3DXVH Function marked = on/not marked = off.
To change the setting:
= Activate/deactivate function.
#
and
$
The phone is in standby.
Setting the language
You can change the language for prompts. The factory set-
ting for your telephone is remote operation with voice an-
nouncements
. If this is not the language that you require
(German or English), switch to operation using tones.
3 Call up the AM menu.
< %DVLF6HWWLQJV = Select and confirm.
P = Enter and confirm the system PIN (factory setting is 0000).
< 5HPRWH2SWLRQVÖÖ =
< /DQJXDJHÖÖÖÖÖÖÖÖ =
<
Language = Select the required language.
# and $ The phone is in standby.