Siemens 3035isdn - Manual (Page 30)

52
Press the keys in the
specified order
Cost-effective telephoning
17.5.00 Kosten.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0
Displaying/deleting call costs
You can check the total amount, the total costs/units for
internal subscribers and the call numbers configured in
succession.
Call the menu.
< 6HWWLQJVÖÖÖÖÖÖÖÖ = Select and confirm.
< 6\VWHPVHWWLQJVÖ =
< &RVWVGXUDWLRQÖÖ =
P = Enter the base PIN (factory setting 0000) and confirm.
&RVWRYHUYLHZ = Select and confirm.
< or ; Change to other displays.
If the internal subscribers have been allocated names,
then these will appear on the display. The total amount dis-
play also shows the date of the last deletion.
End display.
or
9 Open the supplementary menu.
'HOHWHDPRXQWÖ = Delete the amount displayed.
#
and
$
The phone is in standby.
53
Press the keys in the
specified order
Cost-effective telephoning
17.5.00 Kosten.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0
Telephone accounts
You can allocate a certain credit to fellow users by setting
up telephone accounts (PIN accounts). When this credit
has been exhausted, users can only receive calls or con-
duct internal calls. When the telephone accounts have
been activated, an account PIN is required before calls can
be made.
If no limit is entered for telephone accounts, then the un-
limited total is calculated. This makes it possible to check
the costs accrued by each PIN user.
You can set up a maximum of 4 telephone accounts. After
this it is only possible to make calls after an account PIN or
base PIN is entered.
The account PIN is assigned to the user, not to the device.
Setting up telephone accounts (credit, PIN)
Call the menu.
< 6HWWLQJVÖÖÖÖÖÖÖÖ = Select and confirm.
< 6\VWHPVHWWLQJVÖ =
< &RVWVGXUDWLRQÖÖ =
P = Enter the base PIN (factory setting 0000) and confirm.
< 3,1DFFRXQWV = The display shows all accounts with the relevant unit or
cost counts. The activated accounts are marked.
< Account 9 Select the required account and open the supplementary
menu.
(GLWDFFRXQW = Select and confirm.
'HILQH3,1 =
P = Enter any account PIN (max. 8 characters) and confirm.
< 'HILQHOLPLW = Select and confirm.
® The account PIN should not be identical with exist-
ing account PINs, the base PIN or an emergency
number.
The base station telephone checks that the account
PIN is unique. If it finds an identical number, an error
message will appear on the display and the user will
be prompted to enter a new PIN code.