Siemens 3035isdn - Manual (Page 36)

62
Press the keys in the
specified order
Telephoning with multiple subscribers
17.5.00 Mehrere.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0
Parking – > ©
You are on an external call and wish to connect this to an-
other phone on your ISDN line, for example.
Call the menu.
< &DOO3DUN = Select and confirm.
P Enter any one- or two-digit parking number. If no parking
number is entered, press OK to activate parking.
= Confirm the number.
$ Replace the handset; the base station telephone is in
standby.
The maximum parking time in the exchange is three min-
utes.
Returning to a call
(“unparking”) –
> ©
#
Lift the handset.
Call the menu.
< &DQFHO&DOO3DUNÖ = Select and confirm.
P Enter any previously assigned parking number.
= Call status is restored.
© Handset: Press z , · , s .
Confirm with 1 .
Then enter any one or two-digit parking number
and confirm with
1 .
© Handset: Press D , z , · , · .
Confirm with 1 .
Then enter the previously assigned parking number
and confirm with
1 .
63
Press the keys in the
specified order
Telephoning with multiple subscribers
17.5.00 Mehrere.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0
Three-party conference: –
> ©
A conference circuit enables you to talk to two parties at
the same time. The subscribers in question may both be
external or may consist of one internal and one external
subscriber.
– from an external call
You are talking to an external subscriber.
Call the menu
(QTXLU\&DOO = The call is placed on hold.
P Enter the call number of the external subscriber. You can
also select this from the telephone directory.
The connection is set up and the subscriber answers.
or
,17 – Enter the call number of the internal subscriber.
The connection is set up and the subscriber answers.
3DUW\&RQI = The conference circuit is set up.
The display shows the call numbers or names of both
parties.
– from an internal call
You are talking to an internal subscriber.
&2168/7
P Enter the call number of the external subscriber. You can
also select this from the telephone directory.
The connection is set up and the subscriber answers.
3DUW\&RQI = The conference circuit is set up.
The display shows the call numbers or names of both par-
ties.
➡
© Handset: Press { } and select the call number
of the second subscriber. The subscriber answers.
To set up a three-party conference:
press
z and 4 .