Siemens 3035isdn - Manual (Page 22)

36
Press the keys in the
specified order
Comfort telephone features
17.5.00 Komfort.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0
Changing/displaying/deleting entries
- Open the telephone directory.
; or < Select the required entry.
9 Open the supplementary menu.
< (GLWHQWU\ЦЦЦЦ = Select and confirm.
P < Change the name (see page 171). Move one line down and
P enter or change the call number.
9 Open the supplementary menu.
6DYHHQWU\ЦЦЦЦЦ = Save the entry.
#
and
$
The phone is in standby.
Displaying available memory
- Open the telephone directory.
9 Open the supplementary menu.
< $YDLODEOHPHPRU\ = The display shows the free memory.
# and $ The phone is in standby.
Deleting the base station telephone
directory
- Open the telephone directory.
9 Open the supplementary menu.
< 'HOHWH/LVWÖÖÖÖÖ = Select and confirm.
P = Enter the base PIN (factory setting 0000) and confirm.
<(6Ö Confirm deletion of all entries.
#
and
$
The phone is in standby.
® Other menu items in the supplementary menu are
as follows:
● Display entry,
● Delete entry.
37
Press the keys in the
specified order
Comfort telephone features
17.5.00 Komfort.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0
Sending the telephone directory – >
You can copy the telephone directory entries from your
base station telephone into the comfort handset tele-
phone directory and vice versa. The handset should be to
hand.
- Open the telephone directory.
9 Open the supplementary menu.
< &RS\/LVWЦЦЦЦЦЦ = Select.
The base station telephone display shows all recipients
(INTERN 1 to 6) to whom the telephone directory can be
transferred.
< Intern 1...6 = Select the required recipient. The list is sent.
Sending individual entries – >
You can send individual entries to each registered Comfort
handset. Have the handset to hand.
- Open the telephone directory.
< Name 9 Select to send an entry.
< &RS\HQWU\ЦЦЦЦЦ = Select.
The display shows all recipients (INTERN 1 to 6) to whom
the entry can be transferred.
< Intern 1...6 = Select the required recipient. The entry is sent.
Telephone directory – receiving an entry – >
Your handset/base station telephone will ring after the
send procedure has been initiated from another internal
subscriber.
#
Answer the call.
P = Enter the PIN code of the receiving device (factory setting
0000) and confirm.
Reception begins. When the procedure is complete, the
display indicates how many entries have been transferred.
Entries with identical call numbers are not overwritten.
The number of stored entries can therefore differ from the
number of entries transferred.