Siemens 3035isdn - Manual (Page 69)

122
Press the keys in the
specified order
Answering machine
17.5.00 Anrufb.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0
Changing the AM PIN
3 Call up the AM menu.
< %DVLF6HWWLQJV = Select and confirm.
P = Enter and confirm the system PIN (factory setting is 0000).
< &KDQJH$03,1ÖÖÖ =
P = Enter and confirm the new AM PIN (maximum 8 digits).
P = Enter and confirm the AM PIN again.
#
and
$
The phone is in standby.
Activating the AM lock
If you want to protect messages and settings against un-
authorised access.
Prerequisite: you must enter a new AM PIN. The factory
setting for the AM PIN is “0000”.
3 Call up the AM menu.
< %DVLF6HWWLQJV = Select and confirm.
P = Enter and confirm the system PIN (factory setting is 0000).
< $0/RFNЦЦЦЦЦ = Select and confirm.
#
and
$
The phone is in standby.
® You can check the AM PIN you have defined by test-
ing the AM lock.
123
Press the keys in the
specified order
Answering machine
17.5.00 Anrufb.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0
Remote replay
You can query and operate the answering machine of your
base station telephone from any other phone (e.g. hotel,
payphone) and from your handset, i.e. check and delete
messages, record announcements and activate/deactivate
the answering machine.
Prerequisites for using remote replay
● You must have changed the AM PIN at least once.
● Remote replay must be enabled.
Enabling remote replay
Prerequisite: you have changed the AM PIN
(see page 122).
3 Call up the AM menu.
< %DVLF6HWWLQJV = Select and confirm.
P = Enter and confirm the system PIN (factory setting is 0000).
< 5HPRWH2SWLRQVÖ =
5HPRWH&RQWUROÖ = Activate/deactivate function.
# and $ The phone is in standby.
Enabling remote delete
If you want to delete messages and memos remotely you
must enable this function.
3 Call up the AM menu.
< %DVLF6HWWLQJV = Select and confirm.
P = Enter and confirm the system PIN (factory setting is 0000).
< 5HPRWH2SWLRQVÖÖ =
< 5HPRWH'HOHWHÖÖ =
Activate/deactivate the function.
#
and
$
The phone is in standby.
® If you are using the remote replay function from an
older telephone, you will need to use a tone gener-
ator
or switch this telephone to DTMF.