Siemens 3035isdn - Manual (Page 25)

42
Press the keys in the
specified order
Comfort telephone features
17.5.00 Komfort.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0
Deflecting a call – >
You can deflect calls to:
● the set destination call number,
● a subscriber from the telephone directory or
● temporarily to a new destination call number to be
entered.
The base station telephone rings.
)25:$5' The display shows the set destination call number.
= The call is deflected to the destination call number.
or
- Open the telephone directory.
< Subscriber = Select the required subscriber and confirm.
or
1(:12
P = Enter the temporary destination call number and confirm.
This only applies for the current call deflection operation.
43
Press the keys in the
specified order
Comfort telephone features
17.5.00 Komfort.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0
Call forwarding
You may wish to forward calls permanently to a particular
connection. Call forwarding can be implemented externally
at the exchange or internally within the device.
Call forwarding
can be set up separately for each individ-
ual call number (MSN) (to the mobile phone during vaca-
tion, to the office, to one‘s neighbour, etc.).
External call forwarding (in device via 2nd B-
channel)
In factory setting, the base station telephone forwards the
call via the second phone line of your ISDN connection.
This means that both phone lines are busy for the dura-
tion of a call
. You are liable for the connection costs in-
volved in forwarding to the destination. You save the pro-
vider‘s charges for this function.
External call forwarding (in exchange)
The two phone lines of your ISDN connection are not
used during call forwarding. The call is forwarded in the
provider‘s exchange. The call is not signalled on your tele-
phone. The connection costs involved are borne by you,
along with a surcharge.
You should define the conditions under which external call
forwarding is to take place:
● unconditional,
● on busy,
● on no reply (after about 5 rings).
® If you would like to use a network-based answering
machine function (T-Net box) in addition to your inte-
grated answering machine, you should note that
this can only be activated via external call forward-
ing. Only the activation options of the answering
machine in the network (T-Net box) should be used.
® Only immediate forwarding is possible.
® In the case of external call forwarding, each device
connected to the S0 bus receives an indication that
call forwarding has been activated. This is not the
case with internal call forwarding.