Siemens 3035isdn - Manual (Page 43)

74
Press the keys in the
specified order
Individual telephone settings
17.5.00 Ind_einr.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0
– Setting with call forwarding
You can set immediate call forwarding on a function key;
the forwarding route set on page 101 then applies (internal/
external).
Call the menu.
< 6HWWLQJVÖ = Select and confirm.
< )XQFWLRQNH\V =
! Press the required function key.
9 Open the supplementary menu.
< ,6'1)XQFWLRQVÖÖ = Select and confirm.
)RUZDUGLPPHGLDW = Select the type of forwarding.
< MSN 1...7 = Select and confirm call number (MSN).
P Enter the destination call number or confirm existing num-
ber.
9 Open the supplementary menu.
6DYHHQWU\ = End.
#
and
$
The phone is in standby.
The destination call number appears in the display when
this function key is pressed. Call forwarding is active.
– Setting with malicious call ID (MCID)
The malicious call ID feature is used to identify nuisance or
threatening callers. This feature is only available from your
provider on valid grounds.
Call the menu.
< 6HWWLQJVÖ = Select and confirm.
< )XQFWLRQNH\V =
! Press the required function key.
9
< ,6'1)XQFWLRQV =
< ,GHQWLI\FDOOHUÖ =
The display shows the new assignment.
#
and
$
The phone is in standby.
The malicious call ID feature is initiated by pressing the
function key during or immediately after a call. The display
contains the message “will be identified”
.
®
Pressing the function key again deactivates call for-
warding.
75
Press the keys in the
specified order
Individual telephone settings
17.5.00 Ind_einr.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0
– Setting with send MSN
The send MSN feature is used to define the call number to
be used for the next call.
The send MSN selected with the function key only applies
to the next outgoing call.
Call the menu.
< 6HWWLQJVÖ = Select and confirm.
< )XQFWLRQNH\V =
! Press the required function key.
9
< ,6'1)XQFWLRQV =
< 061QH[WFDOO = Select and confirm.
< MSN 1...7 = Select and confirm the required send MSN.
The display shows the new assignment.
#
and
$
The phone is in standby.
Deleting function key settings
Call the menu.
< 6HWWLQJVÖ = Select and confirm.
< )XQFWLRQNH\V =
! Press the required function key.
9 Open the supplementary menu.
< 'HOHWHHQWU\ = Select and confirm.
# and $ The phone is in standby.