Sierra Wireless DART 200 CDPD Modem User Manual

Page 198

DART 200 CDPD Modem User’s Guide

Index

Sierra Wireless, Inc.

Index-6

M (cont.)

messages

broadcast, 4-1, 4-4

receiving, 4-2

DART 200, 8-25
encrypting, 4-1
error, 8-25
listening for incoming, 5-6, 5-18
multicast, 4-1, 4-2
starting with AT, 7-2

Mobile Application Subsystem. See MAS
Mobile Data Base Stations. See MDBSs
Mobile Data Intermediate System. See MDIS
Mobile End Station. See M-ES
modem echo, 5-28
modes of operation

client mode, 5-6, 5-8, 5-10, 5-11, 5-17, 8-18
command mode, 5-10, 5-17, 5-24, 7-1, 7-2 8-3, 8-4,
8-5, 8-6, 8-11, 8-13, 8-15, 8-16, 8-18, 8-21, 8-22
online mode, 5-2, 5-3, 5-8, 5-9, 5-10, 5-15, 7-2, 8-3,
8-4, 8-6, 8-9, 8-18, 8-21
PAD, 5-18
server mode, 5-7, 5-9, 5-10, 5-14, 5-15, 5-19, 8-18

Molex connector, 2-1
multicast mode

definition, 4-1
set up, 4-2

NEI, 2-8, 3-1

active, 5-26
broadcast, 4-2
multicast, 4-2, 4-3

defining, 4-3
entering, 4-3
verifying, 4-3

multiple, 5-26
network address, 5-25
point-to-point, 4-4
registered, 5-26
registering, 4-3
troubleshooting, 8-25

NEMA enclosure, 2-1
null modem

adapter, 6-2
cables, 6-3
connector, 6-2
location, 6-2
requirement, 6-1, 6-3

online mode, 2-19, 5-2, 5-3, 5-8, 5-28, 5-29, 7-1, 8-4

checking character formats in, 8-18
data forwarding when in, 8-9
echo, 5-28, 8-21
echo default, 8-21
establishing for DART 200, 5-15
for DART 200, 5-9, 5-10
for M-ES, 5-9
for the MAS, 5-3
inter-character time-out data forwarding when in, 8-9
putting DART 200 in, 5-2
troubleshooting, 8-4

Packet Assembler - Disassembler. See PAD
PAD

data stream, 4-1
keep-alives, 8-18

PAD operating mode, 5-18, 8-14
parameters

blocksize, 8-23
key, 5-5
setting up for PAD operating mode, 5-18
setting up for UDP server, 5-6
using with AT commands, 1-5
XID, 2-11, 2-12

parity

considerations, 8-17
disabling, 5-23
settings, 5-22

Personal Identification Number. See PIN
PIN

command, 8-2
management system, 3-2
purpose, 3-2
requirement, 3-2

ping, 1-3, 5-22

an IP Address, 5-26
command, 2-21
device, 2-21
format, 5-27
network server, 2-21
packet size, 2-21
server, 5-27
targetting port numbers, 8-25
testing, 2-6, 2-21
times, 5-27
troubleshooting, 2-21, 8-13
to validate SLIP session, 5-27
troubleshooting, 2-19

for DART 200, 5-25

values

for DART 200, 5-27

polling, 5-12, 5-19, 5-21

by host UDP, 5-11

power cord, 1-2, 2-1