Sierra Wireless DART 200 CDPD Modem - Manual (Page 13)

PN1197-00 Revision 1.0
About This Guide
Who should read this guide
This User’s Guide is designed to assist application software developers
with setup, installation, testing, and design of applications for the Data
Access Radio Transceiver (DART) 200.
Skills required to use this guide
The reader requires a basic working knowledge of Transmission Control
Protocol/Internet Protocol (TCP/IP) and the use of the Attention (AT)
command set to use this guide.
What is in this guide
This guide provides information and assistance for both physical
installation and programming of the DART.
This guide is composed of eight chapters, eight appendixes, a glossary
and an index.
Chapter 1, Introduction, describes new features for version 3.0.10, how
to migrate from previous versions, and Cellular Digital Packet Data
(CDPD) network information. Also, the AT command set is summarized
in this chapter.
Chapter 2, Installation and Setup, provides the basic information needed
to install, setup, and test the modem on the CDPD network.
Chapter 3, CDPD Security Features, discusses security features such as
airlink security, authentication services, and modem security
management.
Chapter 4, Broadcast and Multicast Operation, discusses the CDPD
broadcast and multicast functions.
Chapter 5, DART Supported Protocols, discusses and gives set up
instructions for the communication protocols supported by the DART,
including User Datagram Protocol (UDP), Transmission Control
Protocol (TCP), Serial Line Interface Protocol (SLIP), and telnet. The
TCP and UDP sections include sample setups for each of the protocols.