Sierra Wireless DART 200 CDPD Modem - Manual (Page 127)

PN1197-00 Revision 1.0
D SLIP Setup Examples
Trumpet
The Trumpet Winsock is a shareware Windows only package that is
currently in widespread use. Support for it is available primarily through
Internet E-mail and the USENET newsgroup at alt.winsock. Look for a
file called winsock.zip and a set of basic applications (ftp, telnet, ping,
etc.) in a file called winapps.zip at:
ftp.psychol.utas.edu.au:/pub/pc/trumpet/winsock.
Trumpet is frequently used to support the SLIP interface of CDPD
modems including the DART. For the DART the installation and startup
instructions follow. Refer to Chapter 5, DART Supported Protocols, for
complete information on SLIP setup.
Installation and startup
The following discussion assumes that Trumpet is not yet installed on
your PC.
To do a basic installation:
1. Create a directory called Trumpet on your C drive
2. Copy winsock.zip and winapps zip to the TRUMPET directory
3. Unzip the files using PKUNZIP
• PKUNZIP WINSOCK.ZIP
• PKUNZIP WINAPPS.ZIP
4. If desired create Icons for TCPMAN, PINGW and TELW
Appendix
? ?
NOTE:
These instructions
assume that the
DART SLIP setup
described in Chapter
5 has been completed.