Sanyo IDC-1000ZU - Manual (Page 98)

SAMPLING WB: Sampling white balance
œ For setting the white balance more accurately. Used for when the light source cannot be
specified.
œ When sampling white balance is set, the indicator = appears.
FINE SKY: Fine sky white balance
œ Sets the white balance to a value proper for when the light source is a sunny day.
œ When fine sky white balance is set, the indicator F appears.
CLOUDY SKY: Cloudy sky white balance
œ Sets the white balance to a value proper for when the light source is a cloudy day.
œ When the cloudy sky white balance is set, the indicator y appears.
FLUORESCENT: Fluorescent white balance
œ Sets the white balance to a value proper for when the light source is fluorescent lighting.
œ When the fluorescent white balance is set, the indicator > appears.
TUNGSTEN: Tungsten white balance
œ Sets the white balance to a value proper for when the light source is tungsten lighting.
œ When the tungsten white balance is set, the indicator { appears.
3
Turn the control dial to select the desired white
balance setting and press the RETURN button.
œ This completes the white balance setting. The white
balance setting indicator appears in the right side of
the monitor.
œ If you selected “SAMPLING WB,” after you press the
RETURN button, perform the operations below to
complete the white balance setting.
1
Aim the camera at a plain sheet of white paper and
fill the entire monitor with the paper.
2
Press the RETURN button again.
œ This completes the sampling white balance
setting.
To return to auto white balance, press the W.BAL button to display the White Balance
Setting Screen, select “ AUTOMATIC,” and press the RETURN button.
HINT
To capture sepia-tone images
œ At 1 of step 3, instead of using a white sheet of paper to set the white balance, use a blue
one. You can experiment by changing the paper color with which the white balance is set for
different results.
SET WB
97
English