Sanyo IDC-1000ZU - Manual (Page 51)

Capturing and playing back still images
Capturing still images
Preparation
œ Insert a disk (see page 30).
œ Turn the power on (see page 32).
1
Put the digital disk camera in the still image shooting
mode.
œ Set the CAMERA/PLAY switch to “CAMERA.”
œ Turn the mode selector dial to & .
œ If necessary, set the resolution (see page 84) and
compression ratio (see page 85) as desired.
2
Select which monitor to use and compose the image.
œ You can compose the image by looking through the
viewfinder or by looking at the LCD monitor.
Using the viewfinder
1
Set the monitor switch to “FINDER.”
œ The image is displayed in the viewfinder and the
LCD monitor turns off.
œ If the image in the viewfinder is out of focus, use
the diopter adjustment lever below the viewfinder
to adjust it (see page 21).
2
Look straight into the viewfinder and center the
subject.
Using the LCD monitor
1
Set the monitor switch to “MONITOR.”
œ The image is displayed in the LCD monitor and the
viewfinder turns off.
2
Point the digital disk camera at the subject and center
the subject in the LCD monitor.
Mode selector dial
CAMERA/PLAY switch
C A
M
E
R
A
P
LA
Y
Viewfinder
LCD monitor
Monitor switch
Set to “ FINDER”
Monitor switch
Set to “ MONITOR”
Monitor switch
English
50