Sanyo IDC-1000ZU - Manual (Page 38)

Replacing the remote control battery
The life of the lithium battery will depend on your use of the remote control, but as a general
guideline, it will require replacement approximately once a year. At that time replace it only with
the commercially available CR2025 lithium battery.
1
Pull out the battery holder.
œ Push in the tab to release the battery holder and then
pull it out.
2
Remove the battery.
3
Insert the new battery (CR2025).
œ Wipe the new battery with a soft, dry cloth and then
insert it with the (+) mark facing upward.
4
Push in the battery holder.
Battery holder
Tab
Battery
(+) mark
37
English