Sanyo IDC-1000ZU - Manual (Page 168)

Error messages
Error messages will appear in the monitor or mode display panel in response to conditions of the
digital disk camera or disk.
Monitor display Mode display panel Meaning and remedy
Monitor does not light
Disk is not inserted.
]
Insert disk (see page 30).
Disk is not formatted, or formatting is corrupt.
]
Follow instructions on screen and format disk
(see page 155).
Disk is write-protected.
]
Set disk to write-enabled (see page 155).
Disk is full.
]
Replace with disk that is not full (see pages
30, 31).
Erase unnecessary files (see page 149).
Save files to other media and erase from disk
(see page 159).
Disk is not recognized.
]
Remove disk and insert again.
œ If “REFORMAT?” appears, follow
instructions on screen and reformat disk
(see page 157).
œ If “???” appears again, either replace disk
or press the SET button.
œ Leaving the digital disk camera turned on
for a few minutes may remedy the problem.
Battery pack is dead.
]
Replace with charged battery pack or use AC
adapter/charger (see pages 24, 29, 40).
ã appears in upper
right
Normal display
Digital disk camera becomes warm (see
pages 17, 62).
]
Can still be used, but turn off power as soon
as possible.
REFORMAT?
YES
ÄNO
PROTECTED
DISK FULL
???
or
167
English