Sanyo IDC-1000ZU - Manual (Page 67)

How to play back video clips
■
To pause playback
Press the SET button to pause playback.
œ Press the SET button again to resume playback.
■ To play back one frame at a time
1
Pause playback.
2
Press the arrow button.
To move forward one frame: Press c
To move backward one frame: Press d
■ To return to the beginning or skip to the end
To return to the beginning of the video clip you are viewing: Press j during playback.
To skip to the end of the video clip you are viewing: Press l during playback.
To skip to the beginning of the next video clip: During pause, press l or turn the control dial
clockwise.
To return to the beginning of the previous video clip: During pause, press j or turn the
control dial counterclockwise.
■
Viewing using the shuttle mode (viewing in 1/28ths)
1
Press the RETURN button.
œ You enter the shuttle mode and the Jog/Shuttle Screen
appears.
œ At the Jog/Shuttle Screen, press the F1 button to enter
the jog mode and press the F2 button to enter the shuttle
mode.
œ In the shuttle mode, the video clip is divided up into 28
portions of even length and 1/28 of the video clip is
skipped each time the control dial is turned one click.
(This is useful to check the general contents of video
clips.)
2
Slowly turn the control dial.
Advance playback: Turn the control dial clockwise.
Reverse playback: Turn the control dial counterclockwise.
œ Press c or d to advance or reverse playback one frame at a time.
œ Press j or l to return to the beginning or skip to the end of the video clip.
œ The time indicator shows how far along the video clip playback has progressed.
3
To exit the Jog/Shuttle Screen, press the RETURN or SET button.
Start of video clip End of video clip
Time indicator
Jog/Shuttle Screen
English
66