Sun Microsystems Sun StorEdge 5210 NAS - Manual (Page 90)

78 Sun StorEdge 5210 NAS Quick Reference Manual • November 2004
2. Click Add HS.
FIGURE 9-4 The Add Hot Spare Dialog Box
3. Select the drive you want by clicking the drive image. The default selection is the
left-most available drive on the screen. Be sure that the disk you use as a hot spare
is at least as large as the largest disk in any LUN on this Sun StorEdge 5210 NAS
unit.
4. Click Apply to add the new hot spare.
Removing a Hot Spare
To remove hot spare status from a drive in the RAID array:
1. In the navigation panel, select RAID > Manage RAID.
2. Select the hot spare to be removed by clicking the drive image. If there is only one
hot spare, it is automatically selected.