Sun Microsystems Sun StorEdge 5210 NAS - Manual (Page 36)

24 Sun StorEdge 5210 NAS Quick Reference Manual • November 2004
Adding an Entry to the Checkpoint Schedule
When you add a checkpoint to the table, the system automatically sets up a new
checkpoint for the times and dates you request. You can schedule as many
checkpoints as you want. However, the system uses a large amount of space and
system memory for checkpoints. The more checkpoints you create, the more they
affect system performance.
To add a schedule line:
1. The first step in scheduling checkpoints is to enable them for the file volume. If
you have not already enabled checkpoints, do so:
a. In the navigation panel, select File Volume Operations > Edit Properties.
b. Click the Volume Name drop-down list and select the volume on which you
want to enable checkpoints.
c. Be sure the Enable Checkpoints box is checked ( ). By default, this box is
checked. If not, select the box and click Apply.
2. In the navigation panel, select File Volume Operations > Configure Checkpoints >
Schedule Checkpoints.
FIGURE 4-5 The Schedule Checkpoints Panel