Sun Microsystems Sun StorEdge 5210 NAS - Manual (Page 71)

Chapter 6 UNIX Configuration 59
To manually add a host to the Sun StorEdge 5210 NAS server:
1. In the navigation panel, select UNIX Configuration > Configure NFS > Set Up
Hosts.
FIGURE 6-5 The Set Up Hosts Panel
2. Then click Add to display the Add Host dialog box.
FIGURE 6-6 The Add Host Dialog Box
3. Enter the Host Name. This is the name which identifies the host on the network.
This entry can include alphanumeric (a-z, A-Z, 0-9), “-” (dash), “_” (underscore),
and “.” (period) characters only. The first character must be alphabetical (a-z or A-
Z only).
4. Enter the new host’s IP Address.
5. Select the appropriate checkbox to identify whether the host is Trusted. A trusted
host has root access to the network server.
6. Click Apply to save your changes.