How to enable ups monitoring – Sun Microsystems Sun StorEdge 5210 NAS User Manual
Page 82
70
Sun StorEdge 5210 NAS Quick Reference Manual • November 2004
4. Specify the types of e-mail for the recipient. Check the Notification option, the
Diagnostics option, or both.
5. Select a notification level by clicking Errors, Errors and Warning, or None.
6. Click the
button to add the new recipient to the list of recipients.
7. Repeat steps 1 through 5 for all recipients. You may enter a maximum of four e-
mail addresses.
8. If you need to remove a recipient from the list, select the recipient and click the
button.
9. Select the desired the Notification Level.
■
Click the Errors and Warnings checkbox if you want to enable the server to notify
recipients of all warnings and errors.
■
Click Errors Only if you want e-mail recipients to receive notification of errors,
but not warnings.
■
Click None if you do not want Sun StorEdge 5210 NAS to notify anyone.
10. Click Apply to save your changes.
How to Enable UPS Monitoring
Caution –
Connect the status output of the UPS to the UPS monitoring port on the
rear of the Sun StorEdge 5210 NAS before you enable UPS monitoring. (Refer to the
Sun StorEdge 5210 NAS Hardware Installation, Configuration, and User Guide for
connection details.) Otherwise, the monitoring system will notify you of a UPS
failure.
Note –
The Sun StorEdge 5210 NAS does not support UPS management, only
monitoring.