Sun Microsystems Sun StorEdge 5210 NAS - Manual (Page 26)

14 Sun StorEdge 5210 NAS Quick Reference Manual • November 2004
About Alias IP Addresses
On a Sun StorEdge 5210 NAS system, you can add up to nine alias IP addresses to
the primary IP address of each NIC port. Therefore, a single network interface card
with one port could provide up to 10 usable IP addresses.
To add an alias IP address to the selected NIC, enter it in the IP-Aliases field. Then
click the button to add it to the IP-Aliases list. If you need to remove an alias
from the list, select it and click the button. These changes are saved when you
click Apply.
How to Set the Default Gateway Address
The default gateway address is the IP address of the gateway or router on the local
subnet that is used by default to connect to other subnets.
To specify the default gateway address for the Sun StorEdge 5210 NAS server:
1. In the navigation panel, select Network Configuration > Configure TCP/IP > Set
Gateway Address.
FIGURE 3-3 The Set Gateway Address Panel
2. Enter the gateway address in the Gateway text box.
3. Click Apply to save your changes.