Sun Microsystems Sun StorEdge 5210 NAS - Manual (Page 32)

20 Sun StorEdge 5210 NAS Quick Reference Manual • November 2004
How to Attach Segments
You can add segments to existing primary volumes to increase the volume’s total
size. You can attach a segment from the same LUN or from a different LUN. Once
you add a segment to a volume, you cannot remove it.
You must create a segment before you can attach it to a volume. See “How to Create
File Volumes and Segments” on page 18 for information on creating segments.
To attach a segment:
1. In the navigation panel, select File Volume Operations > Attach Segments.
FIGURE 4-2 The Attach Segments Panel
2. Select the primary volume you are expanding from the Existing Volumes column.
3. Select the segment you are attaching from the Available Segments column.
4. Click Apply to attach the segment to the volume.