Sun Microsystems Sun StorEdge 5210 NAS - Manual (Page 54)

42 Sun StorEdge 5210 NAS Quick Reference Manual • November 2004
When a user logs on, the server checks for a subdirectory that matches the user’s
name. If a match is found and that share does not already exist, a temporary share is
added. When the user logs off, the share is removed.
Windows clients can automatically log a user off after fifteen minutes of inactivity,
which results in the autohome share disappearing from the list of published shares.
This is normal CIFS protocol behavior. If the user clicks on the server name or
otherwise attempts to access the Sun StorEdge 5210 NAS (for example, through an
Explorer window), the share automatically reappears.
Note – All autohome shares are removed when the system reboots.
Configuring Autohome Shares
To enable autohome shares:
1. In the navigation panel, select Windows Configuration > Configure Autohome.
FIGURE 5-5 The Configure Autohome Shares Panel
2. Select the Enable Autohome checkbox.
3. Enter the Autohome Path. See “About Autohome Shares” on page 41 for the path
name rules.