Determining sp and platform network mac addresses – Sun Microsystems FIRE V40Z User Manual
Page 47
Chapter 1
Introduction
25
■
If the SP does not locate an IP address, the following message appears:
Unable to get
SP IP address
In this case, you must manually enter an IP address before you press the Select
operator panel button to start autoconfiguration.
3. Wait until the autoconfiguration is complete, at which point the SP automatically
reboots.
The following message displays when autoconfiguration is running.
SP AutoConfigure
in progress
Note –
If the autoconfiguration is unsuccessful, a failure message displays. Press
any button to clear it.
Determining SP and Platform Network MAC Addresses
Use the following commands if you need to determine the MAC address of your
server’s SP or platform:
# ssh
spipaddress -l spusername sp get mac
# ssh
spipaddress -l spusername platform get mac