Sun Microsystems FIRE V40Z - Manual (Page 215)

Appendix H Service Processor Commands 193
SP Load Settings Subcommand
Description: Configures an SP with the same configuration as that of another SP.
You can also perform autoconfiguration from the operator panel to perform this
same function. For more information, see
“Autoconfiguring the SP (Optional
Method)” on page 24 .
Format
Command format:
sp load settings {{ -s | --sp } SP_IP_OR_HOST [-H |--noheader]
TABLE H-46 lists the arguments for this subcommand.
EE Shadow Boot Block
EF System memory test
F0 Initialize interrupt vectors
F1 Initialize Run Time Clock
F2 Initialize video
F3 Initialize System Management Manager
F4 Output one beep
F5 Clear Huge Segment
F6 Boot to mini DOS
F7 Boot to Full DOS
TABLE H-46 Arguments for Subcommand sp load settings
Argument Description
{ -s | --sp } The IP address of the machine from which to copy the
configuration information.
[-H |--noheader] Suppresses header output.
TABLE H-45 Boot Block Codes in Flash ROM
Post Code Description