SMC Networks SMC2552W-G2-17 - Manual (Page 84)

SNMP
6-37
6
Configuring SNMP and Trap Message Parameters
The access point SNMP agent must be enabled to function (for versions 1, 2c, and
3 clients). Management access using SNMP v1 and v2c also requires community
strings to be configured for authentication. Trap notifications can be enabled and
sent to up to four management stations.
SNMP
– Enables or disables SNMP management access and also enables the
access point to send SNMP traps (notifications). (Default: Disable)
Location
– A text string that describes the system location. (Maximum length: 255
characters)
Contact
– A text string that describes the system contact. (Maximum length: 255
characters)
Community Name (Read Only)
– Defines the SNMP community access string that
has read-only access. Authorized management stations are only able to retrieve
MIB objects. (Maximum length: 23 characters, case sensitive; Default: public)