SMC Networks SMC2552W-G2-17 - Manual (Page 151)

Command Line Interface
7-14
7
Command Usage
• If you purchased an access point outside of the United States, the country
code must be set before radio functions are enabled.
• The available Country Code settings can be displayed by using the country
?
command.
Example
prompt
This command customizes the CLI prompt. Use the no form to restore the default
prompt.
Syntax
prompt
<string>
no prompt
string
- Any alphanumeric string to use for the CLI prompt.
(Maximum length: 32 characters)
Default Setting
Enterprise AP
Command Mode
Global Configuration
Example
system name
This command specifies or modifies the system name for this device. Use the no
form to restore the default system name.
Syntax
system name
<name>
no system name
name
- The name of this host.
(Maximum length: 32 characters)
Default Setting
Enterprise AP
Enterprise AP#country tw
Enterprise AP#
Enterprise AP(config)#prompt RD2
RD2(config)#