Flash/file commands, Bootfile, Bootfile 7-55 – SMC Networks SMC2552W-G2-17 User Manual
Page 192

Flash/File Commands
7-55
7
Flash/File Commands
These commands are used to manage the system code or configuration files.
bootfile
This command specifies the image used to start up the system.
Syntax
bootfile
<filename>
filename
- Name of the image file.
Default Setting
None
Command Mode
Exec
Command Usage
• The file name should not contain slashes (\ or /), the leading letter of the file
name should not be a period (.), and the maximum length for file names is
32 characters. (Valid characters: A-Z, a-z, 0-9, “.”, “-”, “_”)
• If the file contains an error, it cannot be set as the default file.
Example
Table 7-10. Flash/File Commands
Command
Function
Mode
Page
bootfile
Specifies the file or image used to start up the system GC
copy
Copies a code image or configuration between flash
memory and a FTP/TFTP server
Exec
delete
Deletes a file or code image
Exec
dir
Displays a list of files in flash memory
Exec
show bootfile
Displays the name of the current operation code file that
booted the system
Exec
Enterprise AP#bootfile -img.bin
Enterprise AP#