SMC Networks SMC2552W-G2-17 - Manual (Page 182)

SNMP Commands
7-45
7
- dot1xAuthFail - A 802.1X client station has failed RADIUS
authentication.
- dot1xSuppAuthenticated - A supplicant station has been successfully
authenticated by the RADIUS server
- localMacAddrAuthSuccess - A client station has successfully
authenticated its MAC address with the local database on the access
point.
- localMacAddrAuthFail - A client station has failed authentication with
the local MAC address database on the access point.
- iappStationRoamedFrom - A client station has roamed from another
access point (identified by its IP address).
- iappStationRoamedTo - A client station has roamed to another access
point (identified by its IP address).
- iappContextDataSent - A client station’s Context Data has been sent to
another access point with which the station has associated.
- sntpServerFail - The access point has failed to set the time from the
configured SNTP server.
- wirelessExternalAntenna - An external antenna has been enabled.
- dot11WirelessStationDeauthenticate - A client station has
de-authenticated from the network.
- dot11StationDisassociate - A client station no longer associates with
the network.
- dot11StationAuthenticateFail - A client station has tried and failed to
authenticate to the network.
Default Setting
All traps enabled
Command Mode
Global Configuration
Command Usage
This command is used in conjunction with the snmp-server host and
snmp-server enable server
commands to enable SNMP notifications.
Example
Enterprise AP(config)#no snmp-server trap dot11StationAssociation
Enterprise AP(config)#