SMC Networks SMC2552W-G2-17 User Manual
Page 231

Command Line Interface
7-94
7
beacon-interval
Configures the rate at which beacon signals are
transmitted from the access point
IC-W
dtim-period
Configures the rate at which stations in sleep mode
must wake up to receive broadcast/multicast
transmissions
IC-W
fragmentation- length
Configures the minimum packet size that can be
fragmented
IC-W
rts-threshold
Sets the packet size threshold at which an RTS must
be sent to the receiving station prior to the sending
station starting communications
IC-W
super-a
Enables Atheros proprietary Super A performance
enhancements
IC-W (a)
7-105
super-g
Enables Atheros proprietary Super G performance
enhancements
IC-W (b/g)
description
Adds a description to the wireless interface
IC-W-VAP
ssid
Configures the service set identifier
IC-W-VAP
closed system
Opens access to clients without a pre-configured
SSID
IC-W-VAP
max-association
Configures the maximum number of clients that can
be associated with the access point at the same time
IC-W-VAP
assoc- timeout-interval
Configures the idle time interval (when no frames are
sent) after which a client is disassociated from the
VAP interface
IC-W-VAP
auth- timeout-value
Configures the time interval after which clients must
be re-authenticated
IC-W-VAP
shutdown
Disables the wireless interface
IC-W-VAP
show interface wireless
Shows the status for the wireless interface
Exec
show station
Shows the wireless clients associated with the access
point
Exec
Table 7-17. Wireless Interface Commands
Command
Function
Mode
Page