SMC Networks SMC2552W-G2-17 - Manual (Page 266)

VLAN Commands
7-129
7
• Traffic entering the Ethernet port must be tagged with a VLAN ID that
matches the access point’s native VLAN ID, or with a VLAN tag that
matches one of the wireless clients currently associated with the access
point.
Example
Related Commands
management-vlanid (7-130)
management-vlanid
This command configures the management VLAN ID for the access point.
Syntax
management-vlanid <vlan-id>
vlan-id
- Management VLAN ID. (Range: 1-4094)
Default Setting
1
Command Mode
Global Configuration
Command Usage
The management VLAN is for managing the access point. For example, the
access point allows traffic that is tagged with the specified VLAN to manage
the access point via remote management, SSH, SNMP, Telnet, etc.
Example
Related Commands
vlan (7-129)
vlan-id
This command configures the default VLAN ID for the VAP interface.
Syntax
vlan-id
<vlan-id>
vlan-id
- Native VLAN ID. (Range: 1-4094)
Enterprise AP(config)#vlan enable
Reboot system now? : y
Enterprise AP(config)#management-vlanid 3
Enterprise AP(config)#