SMC Networks SMC2552W-G2-17 - Manual (Page 242)

Wireless Interface Commands
7-105
7
Default Setting
None
Command Mode
Interface Configuration (Wireless-VAP)
Example
ssid
This command configures the service set identifier (SSID).
Syntax
ssid
<string>
string
- The name of a basic service set supported by the access point.
(Range: 1 - 32 characters)
Default Setting
802.11g Radio: SMC_VAP_11G0 (0 to 7)
Command Mode
Interface Configuration (Wireless-VAP)
Command Usage
Clients that want to connect to the wireless network via an access point must
set their SSIDs to the same as that of the access point.
Example
closed-system
This command prohibits access to clients without a pre-configured SSID. Use the no
form to disable this feature.
Syntax
closed-system
no closed-system
Default Setting
Disabled
Command Mode
Interface Configuration (Wireless-VAP)
Enterprise AP(if-wireless g: VAP[0])#description RD-AP#3
Enterprise AP(if-wireless g: VAP[0])#
Enterprise AP(if-wireless g: VAP[0])#ssid RD-AP#3
Enterprise AP(if-wireless g)#