Samsung SVR-470 - Manual (Page 56)

9.1. CH1~CH4 Individual Channel Setup
Chapter 9. PTZ Setup
Press the MENU button, and then select a tab using the left and right buttons. The PTZ sub menus
appear as shown in the picture below. Press the ENTER button, and select a sub menu using the left and
right buttons. Press ENTER again, and then change the settings of the menu by pressing the left and
right buttons.
9.1. CH1~CH4 Individual Channel Setup
Setup the ID and model of a camera by channel.
ƒ CHANNEL: Select a channel.
ƒ PTZ CAMERA ID: Select a camera ID from 0 to 255.
ƒ MODEL: Select the model of the connected camera. The camera input signal varies depending
on the manufacturer; please enter the correct model for the camera.
For compatible camera models, please refer to the appendix of this manual.
9.2. Using PTZ
Select a live screen in full screen mode, and then press the PTZ button to adjust the Pan, Tilt, and Zoom
operations of the camera. For the PTZ operation, the Function button on the main frame or remote
controller can be used.
Pressing the PTZ button on the front panel displays the following screen.
This PTZ option activates only while a PTZ camera is connected to the RS‐485 port.
55