Samsung SVR-470 - Manual (Page 34)

5.4. Clock
5.4. Clock
Setup time‐related settings for a DVR such as the time, date display type etc.
① CLOCK: Configure the NTP and daylight saving time of the DVR. When the time is set, the system
automatically reboots itself to save the previous data.
ƒ DAYLIGHT SAVING: Select "ON" if Daylight Saving Time applies to your area.
‐ DST START: Select a date that Daylight Saving Time begins.
‐ DST END: Select a date that Daylight Saving Time ends.
‐ DATE SETUP: Select the current time of your area.
ƒ NTP (Network Time Protocol): Select "ON" to enable this option.
‐ When enabled, the DVR compares its time with the NTP server once every 24 hours. If the time
difference between the server and itself is more than 2 seconds, it automatically
33