Samsung SVR-470 - Manual (Page 30)

5.1. System
Chapter 5. System Setup
This chapter describes the general system menus of the DVR. Press the MENU button, and then select a
tab using the left and right buttons. The sub menus appear as shown in the picture below. Press the
ENTER button, and select a sub menu using the left and right buttons. Press ENTER again, and then
change the settings of the menu by pressing the left and right buttons.
5.1. System
① LANGUAGE: Select a language for the DVR: a total of 16 languages including Korean and English
are available.
② KEY BUZZER: Select On to activate a buzzer when the front button on the DVR is pressed.
③ DEFAULT: Resets the current settings to their factory defaults.
④ REMOTE SETUP: Select ON to change the settings of the DVR from a remote location.
When "ON" is selected, you can connect to the DVR and change the settings remotely over the
network.
⑤ REMOTE CONTROLLER ID: Activates the remote control ID of connected devices; IDs 1 to 9 are
available. Remote controller IDs appear on the monitoring screen in the form of ID=1 or 2. When
selecting All, ID=All is displayed on the screen as all DVR systems start responding to one remote
controller.
⑥ DESCRIPTION: Displays the DVR information. Select [DISPLAY] and press the ENT button to check
the DVR's system information: S/W version, HDD capacity, IP address, MAC address, and UI Toolkit
version.
29