Samsung SVR-470 - Manual (Page 42)

6.5. SERIAL
DVR Default Settings Port (3495): Control ‐ Connect, PTZ, Event, and other control data
ƒ Default Settings Port +1(3496): Video
ƒ Default Settings Port +2(3497): Audio
i.e.) If DVR's default settings port is: 3495
ƒ Video Settings Port is: 3496
ƒ Audio Settings Port is: 3497
② CLIENT ACCESS Select ON to access the DVR remotely over the network.
③ BANDWIDTH SAVING: Select ON to consume less bandwidth. Selecting [ON] transfers only the
standard frames. [OFF] transfers all frames.
6.5. SERIAL
Configure settings to connect a POS device.
① TYPE: Select RS‐232 or RS‐485.
② SYSTEM ID: Select the system ID.
③ BAUD RATE: Select a data transfer speed (bits per second).
④ DATA BIT: Select a data transfer bit.
⑤ PARITY BIT: Select a type to check data transfer errors.
⑥ STOP BIT: Select a stop bit upon completing a data transfer.
41