Samsung SVR-470 - Manual (Page 47)

7.2. Event Setup
③ EVENT TIME: Select a duration to display events. (3 to 5 seconds)
For the duration, events that occur simultaneously in different channels are recorded, but their
screens do not display. Once the duration is over, the screen changes to the screen of an event
that currently occurs in a different channel.
④ TEXT MONITORING: Select ON or OFF to display text information product name, price, quantity
on the screen when using a POS.
⑤ SENSOR: Select a channel to set up a sensor.
⑥ SENSOR TYPE: Select a sensor option for a selected channel: N/O or N/C.
ƒ N/O: Normal Open sensor
ƒ N/C: Normal Close sensor
ƒ OFF: Disabled
7.2.2. Motion Detection
When the recording mode is set to Motion Detection, set the motion zone and sensitivity for the
channels.
¾ CHANNEL: Select a channel for the MD recording mode.
MOTION ZONE: Available zones are Full and Partial.
ƒ FULL: Records the entire screen when movement is detected.
ƒ PARTIAL ZONE: Records only a selected area on the screen when movement is detected.
ƒ MOTION SENSITIVITY: Select a level for motion detection sensitivity. 1 to 9 levels are
available, with higher levels increasing the sensitivity of the camera to detect more subtle
movements.
46