beautypg.com

Network configuration with windows 2000, Installing network services – Siemens gigaset SE551 User Manual

Page 35

background image

33

Configuring the local network

Gigaset SE551 WLAN dsl/cable / deutsch / A31008-M1029-B101-1-19 / configure_tcpip.fm / 25.10.2006

Sc

hablone 2

004_

12_2

7

Network configuration with Windows 2000

To integrate a PC with Windows 2000 into a network that is configured with a
Gigaset SE551 WLAN dsl/cable you must carry out the following steps:
1. Install the network services (see below).
2. Select computer names and workgroup (see page 34).
3. Install the TCP/IP protocol (see page 35).
4. Make TCP/IP protocol settings (see page 37).
5. Deactivate the http proxy (see page 39).
6. Deactivate the popup blocker (for Mozilla Firefox only, see page 39)
7. Synchronise the TCP/IP settings with the Gigaset SE551 WLAN dsl/cable

(see page 40).

Installing network services

You have to install the network services before the PCs in your network can access
shared resources. This is done as follows:

ì

Click on StartSettingsControl Panel.

ì

Double-click on the Network and dial-up connections icon.

ì

In the left-hand pane click on Add network components.