Siemens gigaset SE551 - Manual (Page 108)

106
Configuring the Advanced Settings
Gigaset SE551 WLAN dsl/cable / deutsch / A31008-M1029-B101-1-19 / configure_router.fm / 25.10.2006
Sc
hablone 2
004_
12_2
7
ì
Click on OK to apply the settings.
Allowed clients
In this screen you can specify which PCs will have wireless access to the Gigaset SE551
WLAN dsl/cable and hence to your LAN.
ì
In the Wireless Network menu, select Allowed Clients.
The default setting for access control is disabled. This means that all PCs that use the
correct
SSID can log in.
The access control is based on the MAC addresses of the PCs' network adapters.
ì
Activate access control via the On option in the MAC address filter field.
Please remember:
u It is very important that you make a note of the entered or generated key(s).
You will need this information to configure the wireless network adapters
properly.
u When you have concluded the configuration you must change the WEP
encryption on the wireless network adapters for the connected PCs in the
same way as they will not otherwise be given access to the Gigaset SE551
WLAN dsl/cable's wireless network.