Setting up remote management – Siemens gigaset SE551 User Manual
Page 122
120
Administration and status information
Gigaset SE551 WLAN dsl/cable / deutsch / A31008-M1029-B101-1-19 / admin_router.fm / 25.10.2006
Sc
hablone 2
004_
12_2
7
The password may contain up to 32 characters. The SSID is case sensitive. Avoid proper
names and all too obvious words. Use a combination of letters, numbers and special
characters.
Setting Idle time before log off:
ì
Enter the period in minutes after which the configuration program is to be aborted
if no entry is made. The default setting is 10 minutes. If you enter the value 0, the
program will never be aborted automatically.
ì
Click OK to accept the settings.
Setting up Remote Management
Remote Management enables a PC that is not on your local network to be used to con-
figure the Gigaset SE551 WLAN dsl/cable with a standard Web browser. You can permit
Remote Management for one particular PC or for any PCs.
For security reasons this function is only available if you have previously changed the
system password for your device (see page 119).
ì
In the Administration menu, select Remote Management.
ì
Select the On option for Remote Management if you wish to permit Remote Man-
agement.
Please remember:
If you ever forget your System Password you will have to reset your Gigaset SE551
WLAN dsl/cable (see page 17). Please bear in mind that this will restore all the settings
to the factory configuration. No System Password will be active either.