Siemens E-110-I - Manual (Page 81)

Chapter 5: Connection Mode
3. Enter the provided fields as below:
Field Description
VC Interface Select a VCC interface from the available interfaces, e.g. aal5-0.
VPI / VCI Enter the VPI/VCI values given by your ISP, e.g. 0 / 35.
Mux Type For PPPoE select LLC, for PPPoA select VC.
Max Proto per AAL5 Keep the default 2.
4. After entering the fields above, click [Apply].
5. When confirmation page appears, click [Close].
6. You will return to the
ATM VC Configuration page and see the newly added ATM VC entry.
2. Creating a PPP interface.
1. Select Wab > PPP.
2. On the PPP Configuration page click [Add] to add a new PPP interface.
3. Enter the provided fields as below:
Field Description
PPP Interface Select a PPP interface from the available interfaces, e.g. ppp-1.
ATM VC Select the ATM VC you created, e.g. aal5-0.
Interface Sec Type Select Public
Rev:01_040220 75