Siemens E-110-I - Manual (Page 36)

SIEMENS ADSL E-110_E-110-I user manual
For Windows ME
1. Select Run from the Start menu.
2. Type
winipcfg
in the dialog box and the click [OK].
3. When the figure below appears, click [Release] and then [Renew] to get an IP address.
For Windows NT
1. Select Run from the Start menu.
2. Type
cmd
in the dialog box and the click [OK].
3. Type
ipconfig
at prompt. Then you will see the IP information from DHCP server.
4. If you want to get a new IP address, type
ipconfig /release
to release the previous IP address and
then type
ipconfig /renew
to get a new one.
30 Rev:01_040220