beautypg.com

Ip filter configuration, Viewing your ip filter configuration, Configuring ip filter global settings – Siemens E-110-I User Manual

Page 64: Ip filter configuration”)

background image

SIEMENS ADSL E-110_E-110-I user manual

IP Filter Configuration

The IP filter feature enables you to create rules that control the forwarding of incoming and outgoing data

between your LAN and the Internet. This chapter explains how to create IP filter rules.

Viewing Your IP Filter Configuration

Select Services > IP Filter. The

IP Filter Configuration

page displays.

Configuring IP Filter Global Settings

The

IP Filter Configuration

page enables you to configure several global IP Filter settings, and displays a

table showing all existing IP Filter rules. The global settings that you can configure are:

Security Level: When High is selected, only those rules that are assigned a security value of High will
be in effect. The same is true for the Medium and Low settings. When None is selected, IP Filtering is

disabled.

Private/Public/DMZ Default Action: This setting specifies a default action to be taken (Accept or

Deny) on private, public, or DMZ-type device interfaces when they receive packets that do not match

any of the filtering rules.

Private – Typically, the global setting for private interfaces is Accept, so that LAN computers have

access to the ADSL Router’s Internet connection.

Public – The interface connects to the Internet. e.g., PPP, EoA, and IPoA interfaces. Typically, the

global setting for public interfaces is Deny, so that all accesses to your LAN initiated from

external computers are denied (discarded at the public interface), except for those allowed by a

specific IP Filter rule.

DMZ – Refers to computers that are available for both public and in-network accesses (such as a

company's public Web server). Packets received on a DMZ interface - a whether from a LAN or

external source - are subject to a set of protections that is in between public and private

interfaces. The global setting for DMZ-type interfaces may be set to Deny so that all attempts to

access these servers are denied by default; the administrator may then configure IP Filter rules to

allow accesses of certain types.

58

Rev:01_040220

This manual is related to the following products: