Siemens E-110-I - Manual (Page 8)

SIEMENS ADSL E-110_E-110-I user manual
Configuration and Management
• DSL Forum TR37-compliant auto configuration
• SNMPv1 over DSL or Ethernet for access to the MIB-II (router only)
• CLI (Command Line Interface) via serial interface or Telnet over Ethernet or DSL
• Web-based Graphical User Interface (GUI) enabling end-user device configuration via Web browser
• Update of boot image configuration data over TFTP/FTP
System Requirements
For using this, you have to make sure you have the following that installed on the clients:
• Operating System must be Windows 95/98/98 SE/ME/NT/2000/XP or Macintosh 8.6/9.x/10.x
• 10/100 Base-T NIC
• 10/100 Base-T (UTP) network cable
Unpacking
Check the contents of the package against the pack contents checklist below. If any of the items is missing,
then contact the dealer from whom the equipment was purchased.
• ADSL Router
• Power Adapter
• RJ-11 ADSL Line Cable
• RJ-45 Ethernet Cable
• CDROM with Quick Start Guide / User Manual
2 Rev:01_040220