Siemens E-110-I - Manual (Page 20)

SIEMENS ADSL E-110_E-110-I user manual
3. The Network window appears. On the Configuration tab, check out the list of installed network
components.
Option 1: If you have no TCP/IP protocol, click [Add].
Option 2: If you have TCP/IP protocol, go to Step 6.
Your network
interface card.
Check out if TCP/IP
for your NIC is
installed or not.
4. Highlight Protocol and click [Add].
5. On the left side of the windows, highlight Microsoft and then select TCP/IP on the right side. Then
click [OK].
14 Rev:01_040220