Siemens E-110-I - Manual (Page 12)

SIEMENS ADSL E-110_E-110-I user manual
ISDN installation
If your telephone service is ISDN (SIEMENS ADSL E-110-I), proceed as follows to install your Hardware:
1. Remove the U-Line (incoming line) form your ISDN NT and plug it into the “LINE” plug of the ISDN
Splitter. Use another phone line to connect your ISDN NT with your ISDN Splitter. Plug this phone line
onto the “PHONE” plug of the ADSL splitter, and plug the other end of the line into the U-Line plug of
your ISDN NT.
ISDN
U-Line
LINE port
MODEM port
PHONE port
ISDN NT
2. Use the line to connect the ADSL Microfilter or Splitter and your ADSL LAN port.
3. Please attach one end of the Ethernet cable with RJ-45 connector to the “LAN” port of your ADSL
Router.
4. Connect the other end of the cable to the Ethernet port of the client PC.
5. Connect the supplied power adapter to the PWR port of your ADSL Router, and plug the other end to
a power outlet.
6. Turn on the power switch.
6 Rev:01_040220