Sanyo PLC-XK3010 - Manual (Page 73)

73
Appendix
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and
Information System Industries Association). This projector supports all commands defined by PJLink
Class 1 and is verified conformance with PJLink Standard Class 1.
For PJ Link password, see the owner’s manual of “Network Set-up and Operation.”
PJLink is a registered trademark of JBMIA and pending trademark in some countries.
Pj Link Notice
Projector Input
RGB
Computer
Component
RGB (Scart)
PJLink Input
RGB 4
RGB
RGB 5
RGB 3
RGB 1
VIDEO
Video
S-video
Computer 1
Video
Parameter
14
1
15
13
11 RGB
Attaching the Filter Cover to the Projector
The supplied filter cover is designed for
preventing dust accumulation on the filter
when mounting the projector on the ceiling.
Place the filter cover on the filter as the
picture shown below.
Turn over the projector. 1
2
Attach the projector to the ceiling mount
in accordance with the instruction manuals
which come with the ceiling mount.
3

Note:
To keep the filter cover in position, be
sure to attach the drop-prevention wire by
threading it through the hole of the filter
cover.
Front feet
Projector
Caps
Filter Cover
(supplied)
Hole
Drop-prevention Wire
(not supplied)
To Ceiling Mount