Sanyo PLC-XK3010 - Manual (Page 41)

41
An interlaced video signal can be displayed in
progressive mode. Select one of the following options.
Off ......... Disabled.
L 1 ......... For an active picture.
L 2 ......... For a still picture.
Film ....... For watching a film. With this function, the
projector reproduces pictures faithful to the
original film quality.
Progressive
Noise reduction
Noise interference on the screen can be reduced.
Select one of the following options to get smoother
images.
Off ......... Disabled.
L 1 ......... Lower reduction
L 2 ......... Higher reduction

Note:
Noise reduction and Progressive can not be selected when the input signal is 480p, 575p,
720p, 1035i or 1080i (p.38).
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then
select Yes. All adjustments will return to their previous
figures.
Reset
Store
To store the adjusted data, select Store and press the
Point ► or the SELECT button. Use the Point ▲▼
buttons to select one from Image 1 to 4 and press the
SELECT button.
A confirmation box appears and then select Yes.
Stored data can be called up by selecting an Image
(1–4) in the Image Mode Selection on page 39.
Store Menu
A confirmation box
appears and then
select Yes.
Video Input