Information, Input source information display, Setting – Sanyo PLC-XK3010 User Manual
Page 57

57
Setting
Information
Input Source Information Display
The Information Menu is used for checking the status of the image signal being projected and the operation of the
projector.
H-sync freq.
V-sync freq.
Lamp counter
Information Menu
The horizontal frequency of the input signal is
displayed in
KHz, or - - - - KHz when no signal.
The vertical frequency of the input signal is displayed
in
Hz, or - - - - Hz when no signal. Numbers of Hz
doubles when during Interlace.
The cumulative lamp operating time is displayed.
Press the INFO. button on the remote control to display
the Information Menu.
INFO. button
Remote Control
Press the Point ▲▼ buttons to select the Information.
The Information Menu is displayed.
See below for displayed information.
Power management
Screen
Off, Ready or Shut down, and Timer are displayed.
The selected screen size is displayed.
Input
Lamp status
The selected input source is displayed.
The selected lamp mode is displayed.
Language
The selected language is displayed.
Key lock
The selected Key lock icon is displayed.
PIN code lock
Off or On1 or On2 is displayed.
Remote control
The selected remote code is displayed.
Direct Operation
Menu Operation
SERIAL NO.
The serial number of the projector is displayed. The
serial number is used to service the projector.